THE REASON FOR THE SPEED OF THE WATER METER

Author: admin / 2022-04-29

We are a professional manufacturer of Water Meter Measurement Bench. Let me share with you the reasons for the speed of the water meter.

  Water meters are instruments for measuring water flow. Most of them are cumulative flow measurements of water. They are generally divided into two categories: volumetric water meters and speed water meters. They originated in the United Kingdom. The development of water meters has a history of nearly two hundred years. , you should first estimate the size and flow range of the flow rate used under normal circumstances, and then select the water meter of the specification with the common flow rate closest to this value as the first choice.

  The following Shandong Yuefeng Electronics Co., Ltd. tells you the reasons for the speed of the water meter:

  1. Select the water meter specification

  Because the stability and durability of the water meter's working performance under common flow rates are the best, it is more in line with the design requirements. If there is a margin for the water pipe considering the future water passing capacity, you can choose a water meter with a lower caliber specification. If the pipeline with a diameter of 200mm is insufficient inflow, a water meter with a diameter of 150mm can be installed, and when the flow rate increases to the normal flow of the pipeline with a diameter of 200mm in the future, the water meter of the same diameter can be replaced. When choosing a water meter for large-scale water-consuming industrial users, they can choose a large-diameter water meter, or they can use several relatively small-diameter water meters in parallel so that individual faulty water meters can be maintained without affecting the normal water supply of users or change the table.

  2. Select the type of water meter indication

  Generally in the word wheel type, the reading is clear and easy to read. However, some people think that it is better to install the pointer type when the meter cannot be read at close range, because this type can judge the reading according to the geometric angle pointed by the pointer, without the need to see the value on the scale cylinder. In recent years, liquid-sealed counters have become popular because they overcome the shortcomings of general counters that are hindered by rust in water for a long time. The readings of remote water meters and prepaid water meters are displayed by electronic devices or collected and transmitted by the collector, but the readings of the base meters should still be retained for comparison in case of problems with the electronic devices that are being read.